|
Ynet Prepaid Internet Cards
The
Easy Way to Connect to the Internet
No registration fee, No
monthly subscription.
No
bills.
Ynet
Easy Access Cards allows you to
have access to the Internet for
a predetermined number of hours
against a prepaid amount of money represented in the cards face value.
Easy Access Cards can be found at your nearest TeleYemen office,
and very soon they will be
available in the Telecommunication Centers, Supermarkets, Hotels and Travel
Agencies.
Easy
Access Denominations, Values and tariff
|
Card
Type & Value
|
Minutes
|
Hours
|
Min
cost
|
Expiry
|
|
Bronze
YR1000
|
170
|
02:50
|
5.88
|
2
months
|
|
Silver
YR2000
|
400
|
06:40
|
5.00
|
2
months
|
|
Golden
YR3000
|
630
|
10:30
|
4.76
|
2
months
|
Cards
are made of soft plastic with different face values as mentioned in the above
table. All cards have
a common design with a unique color on each type.
The first side face contains Card Name, Service Logo and card value.
The back side contains Serial number, Username, Password & usage
instructions in both Arabic & English languages.
Easy
Access Card Usage Instructions
Dialer Set-up
Before you use “Easy Access” Cards you need to create your
Internet Dialer by following up the instructions below:
-
From the “Control Panel” or “My Computer” go to
“Dial-up Networking” or “Networking”.
-
Click the icon “<Make new connection” or “New
Connection” to create new
dialer.
-
Leave the area code empty, type 192 in the “Telephone
Number” field, click “Next” , then click “Finish”
-
You will note a new dialer was created
-
Select the new dialer,
click the right mouse button and select “Properties”
-
In the “Server Types” tab, select only “Enable
software compression” & “TCP/IP” by checking the small box, other
boxes should be empty.
-
Click OK
Now
your computer is ready to use the Easy Access Cards
Connecting
with the Internet;
To
connect with the internet, you will need a username and a password. When using
Easy Access cards, you can obtain the username and the password required by
scratching the black ink layer at the back of each card.
Now
you can activate your dialer and type in the Username and Password in the
specified fields and click “Connect”.
|
